Material: AISI 304 grade (18 / 8 Cr-Ni) stainless steel

Material Width:

Worktop                                               1.50 mm

Material Surface Finishing: PVC film coated, 4N surface finish

Dimensions: Describes lenght x depth x height

Dimensions may vary due to changes on net measurement of the site.

Welding and Visibles Parts: Generally welding shall be made of Argon-Arc system, but via Cr-Ni electrodes where necessary. Table tops and visible parts welding shall be mopped and satina finished. Other parts shall be left to its Natural(China Stone Expo.) sight and dim.

Worktop: The sides of the tables adjacent to walls shall be 60 mm, open sides shall be 40 mm and double bent. Within table top U formed supports shall be present and silicone shall be used as sound isolator between support and table top.

Feet: Unit feet, support and joint elements shall be made of 1,20 mm or 1,50 mm stainless steel according to place used. Feet shall be made of 40x40 mm closed ready made profile. Feet ends shall be made of NYLON VI black hard plastic or height adjustable Cr-Ni feet. Tables up to 2000 mm shall have 4 feet, while longer units shall have 6.